Multilogin Proxy Connection Failed: Where to Look First

· Updated:

A Multilogin proxy connection failed error means Multilogin could not get through the proxy saved in the profile, so it stops the profile instead of opening it without one. Multilogin's help center puts it simply: a proxy that does not work in a regular browser will not work in Multilogin either. So test the line outside Multilogin first, then look at the profile, the agent and your computer. For the setup form itself, see the Multilogin proxy setup guide.

Team workspaces with one IP per profile

Why the Multilogin proxy connection failed

Multilogin checks the proxy when you press Check proxy and again when a profile starts. The check reports Proxy check passed or Proxy check failed; at launch the wording differs between Multilogin X, Multilogin 6 and versions, but every variant means the same thing: the request through the proxy did not complete.

The usual causes, roughly in order of how often they appear:

  • The protocol in the profile does not match the proxy port.
  • The username or password is wrong, often because of a pasted space.
  • The order has expired or the port is wrong.
  • Your network, a VPN or security software blocks the connection.
  • On Multilogin X, the local agent is not connected, which is a separate problem from the proxy.

Step 1: run a Multilogin proxy check, then test outside it

Press Check proxy on the profile and note whether it fails at once or after a long wait. An instant failure points at the protocol, port or login; a long wait points at the network.

Next, take Multilogin out of the picture. Paste the line into the proxy checker, which runs from our servers, and test from the computer that runs Multilogin:

curl -v --max-time 20 -x http://USER:[email protected]:8080 https://proxyv4.com/api/my-ip

Multilogin's help center suggests the same split with a regular Chrome or Firefox and a proxy extension, or with the operating system's proxy settings. If the proxy fails there, contact your proxy provider. If it works there and fails only in Multilogin, the cause is in Multilogin or on your computer.

Step 2: causes inside the profile

Protocol and port

Choose HTTP for an HTTP or dual-mode order and SOCKS5 for an order set to SOCKS5 only. If your provider runs the protocols on separate ports, the port must match. HTTP requests sent to a SOCKS5-only port, or the reverse, fail straight away. If you change the protocol in your provider's dashboard, copy the line again, since the port can change.

Login fields

When you paste an ip:port:user:pass line, Multilogin splits it into fields. Open the profile and check that each part landed in the right place, without spaces or line breaks. A wrong password usually shows as a 407 error in the outside test; see 407 Proxy Authentication Required.

Mimic proxy not working while Stealthfox connects

Mimic (Chromium-based) and Stealthfox (Firefox-based) use the same proxy form. If the same proxy works in one core and fails in the other, the proxy is fine; suspect that core's installation or local software affecting it. Update Multilogin, let it download the core again if offered, and test once more.

Step 3: the agent and your computer

In Multilogin X the local agent on your computer opens the connection to the proxy. If the agent shows as disconnected, profiles will not start whatever the proxy does; restart Multilogin or reconnect the agent before testing proxies.

Multilogin's help center also lists local causes worth checking:

  • Security software and VPNs. Antivirus, firewalls, VPN clients and system-wide proxy tools can block or reroute Multilogin's connections. Pause them or add an exception.
  • System clock. A manually set time or time zone can cause connection problems; sync it with internet time.
  • Network filtering. Some networks block uncommon ports. Test once on a different connection, such as a phone hotspot.
  • Logs. If nothing helps, Multilogin support asks for the logs folder and the exact error text.

One fixed IP per profile for team workspaces

Agencies and companies use Multilogin workspaces to keep each client's or business unit's accounts in separate profiles that several colleagues can open. A dedicated IP per profile keeps every launch on the same address, whoever starts it. Follow each platform's rules on multiple accounts.

ProxyV4 sells private datacenter IPv4 in seven countries (United States, Vietnam, Japan, South Korea, Singapore, United Kingdom and Hong Kong) and static ISP addresses registered to consumer internet providers in the United States and Vietnam. Each IP has one tenant for the whole term, traffic is unmetered, and renewing before expiry keeps the same address. Every proxy supports HTTP(S) and SOCKS5 with username and password, and you choose HTTP only, SOCKS5 only or both on one port from the order's page.

It does not fit if you need per-request rotation (rotating proxies are waitlist-only), mobile IPs, which ProxyV4 does not sell, or IPv6, which is sold separately as IPv6 proxies. See live prices; a single IP can be ordered to test in one profile before the whole team switches.

Confirm the fix

After the check passes, start the profile and open the my IP tool. The address must be the proxy's, in the country you ordered. Ask a teammate to open the same profile, not a copy, and confirm they see the same IP.

If the line fails everywhere and matches your dashboard, open a ProxyV4 ticket with the checker or curl result. A proxy that fails for a technical reason, such as not connecting or showing the wrong location, is covered by the refund policy as a balance credit.

Frequently asked questions

Why does Multilogin fail the proxy check when the proxy works elsewhere?

The proxy is fine, so check the protocol and fields in the profile, the agent connection, the system clock and any VPN or security software on the computer.

Can I use SOCKS5 with a username and password in Multilogin?

Yes, in both Mimic and Stealthfox. With ProxyV4, set the order to SOCKS5 or both protocols first.

Does the proxy work differently in Mimic and Stealthfox?

No. The same line and settings apply to both cores; if only one fails, look at that core's installation.

Will renewing keep the same IP for my profiles?

Yes. Renewing a ProxyV4 proxy before expiry keeps the same address, and you can renew only the proxies still in use.

Is bandwidth limited on ProxyV4 proxies?

Traffic on private IPv4 and static ISP proxies is unmetered, so long sessions are not billed by data.

Team workspaces with one IP per profile

Private IPv4 and static ISP proxies with one tenant per IP and the same address on renewal. Start with one IP in a single Multilogin profile.

Get a working proxy

Related articles

Proxy setup
Running Multilogin profiles on fixed IPs across a whole team
Add a custom HTTP proxy to Multilogin X or Multilogin 6 profiles, for Mimic and Stealthfox alike, and set rules so a shared team never mixes up its IPs.
Free tools
Check proxies in bulk: status, exit IP and latency
Free online proxy checker: paste up to 100 ip:port:user:pass lines and see which proxies work, their exit IP and latency, plus what each failure result means.
Proxy errors
Chrome says ERR_PROXY_CONNECTION_FAILED: clear it in five steps
ERR_PROXY_CONNECTION_FAILED means Chrome cannot reach the proxy it is set to use. Find the leftover setting, wrong port or extension and fix it on any device.
Proxy errors
Fixing a 407 from your proxy: a credentials checklist
407 Proxy Authentication Required means the proxy refused your login. The causes in one table, and fixes for Chrome, curl, Python, Selenium and antidetect apps.
Knowledge base
How to Add and Check a Proxy in BitBrowser
BitBrowser proxy setup step by step: add an HTTP or SOCKS5 proxy with a login, read the Check Proxy result, import lines in bulk and verify the exit IP.
Knowledge base
How to Add, Import and Check Proxies in ixBrowser
ixBrowser proxy setup explained: enter a login proxy per profile, import a list in bulk, run the built-in detection and confirm each profile's exit IP.
Knowledge base
How to Set a Proxy on a VMLogin Browser Profile
VMLogin proxy setup for login proxies: enable the profile's proxy server, choose HTTP or SOCKS5, run Test proxy, save, and confirm the exit IP in the profile.
Products
Dedicated datacenter proxies: one private IPv4 per customer
Private IPv4 proxies in the US, Vietnam, Japan, South Korea, Singapore, the UK and Hong Kong. One tenant per IP, HTTP(S) and SOCKS5, no traffic metering.
Products
Static ISP proxies: residential IPs on consumer networks
Static ISP proxies in the United States and Vietnam: fixed IPs registered to consumer internet providers, rented to one customer, with unmetered traffic.
Pricing
Proxy prices per IP, by location and volume
Current per-IP rates for private IPv4 and static ISP proxies in the US, Vietnam, Japan, South Korea, Singapore, the UK and Hong Kong, with volume discounts.