Fixing a GoLogin Proxy Error, Step by Step
By the ProxyV4 Engineering Team · Updated:
A GoLogin proxy error means GoLogin or its Orbita browser could not get a working connection through the proxy saved in the profile. Start by reading the full error message, then test the same line outside GoLogin: that tells you whether the proxy, your network or the app is at fault. This guide is about diagnosis; for the field-by-field setup, see the GoLogin proxy setup guide.
What a GoLogin proxy error is telling you
GoLogin marks a proxy problem with a red or yellow icon next to the proxy field. According to GoLogin's own troubleshooting documentation, hovering over that icon shows the expanded message, which is far more useful than the short label. Write it down before changing anything.
Two situations look similar but have different causes. In the first, the Check Proxy test fails, a GoLogin proxy check failed result: the proxy did not answer the test. In the second, the check passes but Orbita, GoLogin's browser, opens with connection errors or the wrong IP: the proxy answers, but the profile's own launch or settings break the connection.
Step 1: test the proxy outside GoLogin
Paste the line into the proxy checker, which shows whether the proxy answers, whether the login is accepted and which exit IP and country it uses. Then test from the computer that runs GoLogin:
curl -v --max-time 20 -x http://USER:[email protected]:8000 https://proxyv4.com/api/my-ipGoLogin's documentation suggests the same idea with a regular browser and a proxy extension. If the proxy fails outside GoLogin, fix the line or contact the provider; GoLogin cannot repair a proxy that does not answer.
Reading the outside test
- 407 or a rejected login: the username or password is wrong, often because of a trailing space. See 407 Proxy Authentication Required.
- Connection refused: wrong port or an expired order. Compare with your dashboard.
- Timeout from your computer but success in the online checker: your network blocks the port. GoLogin's documentation suggests switching networks, for example to a mobile hotspot.
- Success everywhere: the proxy is fine; continue with step 2.
Step 2: causes inside GoLogin
If the line works outside GoLogin, work through these. Labels vary by GoLogin version.
Proxy type and port
The type in the profile must match the order. Choose HTTP for an HTTP or dual-mode order and SOCKS5 for an order set to SOCKS5 only. If your provider uses separate ports per protocol, the port must match the type you picked. A type mismatch typically fails at once rather than after a wait, which is a useful clue.
Pasted credentials
When you paste an ip:port:user:pass line, GoLogin splits it into fields. Open the profile and confirm each field holds the right part with no spaces or line breaks; a password containing : can make a pasted line split in the wrong place. Typing the password by hand rules this out.
Custom DNS with an HTTP proxy
GoLogin documents that a custom DNS setting works only with SOCKS4 and SOCKS5 proxies. If a profile has custom DNS and an HTTP proxy, remove the DNS setting or switch the order and profile to SOCKS5.
Orbita proxy not working although the check passes
When the check passes but Orbita fails, compare launch modes. GoLogin's documentation suggests opening the same profile from the web version: if it works there, the problem is local to the desktop app or your computer. Updating GoLogin is also on their list, since older versions can have compatibility problems, and GoLogin's common-errors page covers re-downloading a damaged Orbita core from the settings.
Local security software is the other usual suspect. Antivirus and firewall products can stop Orbita from opening outbound connections or inspect its HTTPS traffic; allow GoLogin and Orbita, or test with the product paused. Launching the profile once without a proxy shows whether Orbita starts at all.
Finally, confirm the result. In the running profile, open the my IP tool; it should show the proxy's address and country. If it shows your own IP, save the profile again and check that only one copy of it is open.
Static IPs for GoLogin profiles with ProxyV4
Agencies and teams use GoLogin to keep client accounts and business units in separate profiles that colleagues can open from different computers. A dedicated IP saved in each profile keeps its address the same wherever it is opened. Follow each platform's rules on multiple accounts.
ProxyV4 sells private datacenter IPv4 in seven countries and static ISP addresses registered to consumer internet providers in the United States and Vietnam. Each IP has one tenant for the whole term, traffic is unmetered, and renewing before expiry keeps the same address. Every proxy supports HTTP(S) and SOCKS5 with username and password; from the order's page you choose HTTP only, SOCKS5 only or both on one port. Switching modes can move the proxy to a new port, so copy the line again afterwards.
It is not the right fit if you need IPs that change on every request (rotating proxies are waitlist-only), mobile IPs, which ProxyV4 does not sell, or IPv6, which is sold separately as IPv6 proxies. Check live prices and order one IP to test in a single GoLogin profile first.
Who to contact when it still fails
If the line fails outside GoLogin while matching your dashboard, contact the proxy provider. With ProxyV4, open a ticket with the checker or curl result; a proxy that fails for a technical reason is covered by the refund policy as a balance credit.
If the line works everywhere except GoLogin, contact GoLogin support. Their documentation asks for the proxy line, a screenshot of the error and your app version.
Frequently asked questions
Why does GoLogin say the proxy check failed when the credentials are right?
Common causes are a type that does not match the order, a port your network blocks, or a hidden character in a field. Test the line in an outside checker to split proxy problems from GoLogin problems.
Should I use HTTP or SOCKS5 in Orbita?
Either works when it matches the order. Use SOCKS5 if the profile needs custom DNS, since GoLogin applies custom DNS only to SOCKS proxies.
Why does my proxy work in curl but fail in GoLogin?
The proxy is fine, so look at GoLogin's fields, the protocol choice, local security software, or an outdated app or Orbita core.
Will renewing a ProxyV4 proxy keep the same IP in my GoLogin profiles?
Yes. Renewing before expiry keeps the same address, so the profiles need no changes.
Can I test one proxy before ordering more?
Yes. A single IP can be ordered and tested in one profile before you scale up.
Fixed IPs that keep GoLogin profiles consistent
Private IPv4 and static ISP proxies, one tenant per IP, unmetered traffic and the same address on renewal. Order one IP and test it in a GoLogin profile.
Order one IP