AdsPower Proxy Check Failed: A Diagnostic Order That Works

· Updated:

When the AdsPower proxy check fails, AdsPower could not complete a test request through the proxy you entered. The fastest way to the cause is to test the same line outside AdsPower first: if it fails there too, the problem is the proxy, the port or your network; if it works there, the cause is inside AdsPower, most often the proxy type, a pasted space or a local setting. This guide covers diagnosis; for the fields themselves, see the AdsPower proxy setup guide.

One private IP per AdsPower profile

What "AdsPower proxy check failed" actually tells you

Pressing Check Proxy makes AdsPower connect to the proxy, log in, and fetch the exit IP and its location from a lookup service. In recent versions a failure shows as Connection test failed. Searches for "AdsPower proxy detection" usually refer to this same check.

The message does not say which step broke, so note how it failed. An instant failure usually means a wrong type, a wrong port or a rejected login. A long wait followed by failure, an AdsPower proxy timeout, usually means packets are being dropped somewhere between your computer and the proxy.

Step 1: test the same line outside AdsPower

Paste the line into the proxy checker. It runs from our servers and tells you whether the proxy answers, whether the login works and which exit IP it uses. Then test from your own computer, because that is where AdsPower connects from:

# HTTP (or dual-mode) order
curl -v --max-time 20 -x http://USER:[email protected]:8080 https://proxyv4.com/api/my-ip
# SOCKS5 order
curl -v --max-time 20 --socks5-hostname USER:[email protected]:8080 https://proxyv4.com/api/my-ip

Reading the result

  • Checker and curl both work: the proxy is fine. Go to step 2; the cause is inside AdsPower or in a setting on your computer that only AdsPower uses.
  • Checker works, curl fails: your network is the problem. An office firewall, public Wi-Fi or a security product may block the port. Try a phone hotspot.
  • Both fail with a login error (407 or rejected user): the username or password is wrong; see 407 Proxy Authentication Required.
  • Both fail to connect: wrong port, an expired order, or the proxy is down. Compare with your dashboard.

Step 2: causes inside AdsPower

If the line works elsewhere, check these in order. Menu names below can differ between AdsPower versions.

Proxy type does not match the order

AdsPower offers several proxy types. For an HTTP or dual-mode order choose HTTP, which carries https:// sites through a tunnel. The HTTPS option expects an encrypted connection to the proxy itself, so it fails against a normal HTTP proxy. For an order set to SOCKS5 only, choose SOCKS5. A type mismatch is the most common reason for an instant failure.

Hidden characters in the pasted fields

Lines copied from spreadsheets or chat apps often carry a trailing space or a line break into the password field. The proxy compares the login exactly, so it rejects it. Clear the fields and paste the line again from your dashboard, or type the password by hand to rule this out.

System clock and leftover system proxies

AdsPower's own troubleshooting guidance lists two local causes that are easy to miss. First, a computer clock that is out of sync with internet time; turn on automatic time setting and sync. Second, leftover proxy settings on your machine: HTTP_PROXY or HTTPS_PROXY environment variables on Windows, or a system web proxy on macOS, can interfere with how AdsPower connects. Remove ones you no longer use.

Recent versions include a Network Diagnostics page, reachable from the failed-check message or the account menu, that tests these items and can upload logs for AdsPower support. Updating AdsPower to the latest version is also on their list, since some fixes only exist in newer releases.

The lookup service used for the check

The check also needs a location lookup service to answer through your proxy. AdsPower lets you choose which one it uses (the setting is labeled differently across versions). If the proxy works in curl but the check fails only at the location step, switch to another lookup service and check again.

Step 3: when the check passes but the profile still fails

A passed check means the proxy answered. If the browser window then shows connection errors or your own IP, compare the saved profile with the line you tested: after a bulk import a shifted column can put the password in the username field. Close other copies of the profile, turn off any VPN running on the computer, and open the my IP tool inside the profile. The address shown must be the proxy's, not your office line.

If AdsPower still fails while the line works everywhere else, contact AdsPower support with the diagnostics logs. If the line fails everywhere and your settings match the dashboard, contact your proxy provider.

Matching proxies to AdsPower profiles with ProxyV4

Teams use AdsPower to keep client accounts, stores and business units in separate profiles. A dedicated IP per profile keeps each one on a stable address. Follow each platform's rules on multiple accounts; a proxy does not change what a platform allows.

ProxyV4 sells private datacenter IPv4 in seven countries (United States, Vietnam, Japan, South Korea, Singapore, United Kingdom and Hong Kong) and static ISP addresses registered to consumer internet providers in the United States and Vietnam. Each IP has one tenant for the whole term and stays the same while the proxy is active; renewing before expiry keeps that address. Every proxy supports HTTP(S) and SOCKS5 with username and password, and you choose HTTP only, SOCKS5 only or both on one port from the order's page. Switching modes can move the proxy to a new port, so copy the line again afterwards.

It does not fit if the platform you use accepts only mobile IPs, which ProxyV4 does not sell, or if you need an IP that changes on every request. IPv6 proxies are a separate product that only works on IPv6-ready sites. See live prices and order a single IP to test in one AdsPower profile before buying more.

Frequently asked questions

Why does AdsPower fail the check when the proxy works in my browser?

Usually the proxy type or a field in AdsPower differs from what the browser uses, or a local setting such as a leftover system proxy affects AdsPower. Compare the fields one by one and run AdsPower's network diagnostics.

Should I choose HTTP or HTTPS in AdsPower?

HTTP for a normal HTTP proxy; it already handles https:// sites. The HTTPS option is for proxies that expect an encrypted connection to the proxy itself.

Does AdsPower support SOCKS5 with a username and password?

Yes. Choose SOCKS5 and fill in the login. With ProxyV4, the order must be set to SOCKS5 or both protocols.

Will my AdsPower profile keep the same IP when I renew?

Yes. Renewing a ProxyV4 proxy before expiry keeps the same address, so the profile needs no changes.

What if a new proxy keeps failing the check?

Test it in the proxy checker and open a ticket if it fails there too. A proxy that fails for a technical reason is covered by the refund policy as a balance credit.

One private IP per AdsPower profile

Private IPv4 and static ISP proxies with one tenant per IP and the same address on renewal. Order a single IP and test it in one profile first.

See live prices

Related articles

Proxy setup
Adding a private IPv4 proxy to AdsPower, one profile or fifty
Add an AdsPower proxy to SunBrowser or FlowerBrowser profiles: Custom HTTP fields, bulk import via the Proxies page, error fixes and a final exit-IP check.
Free tools
Check proxies in bulk: status, exit IP and latency
Free online proxy checker: paste up to 100 ip:port:user:pass lines and see which proxies work, their exit IP and latency, plus what each failure result means.
Proxy errors
When a proxy goes silent: diagnosing timeouts step by step
A proxy timeout means no reply came back before the limit. Read curl (28) and ERR_TIMED_OUT, set sensible Python timeouts and locate where packets get dropped.
Proxy errors
Fixing a 407 from your proxy: a credentials checklist
407 Proxy Authentication Required means the proxy refused your login. The causes in one table, and fixes for Chrome, curl, Python, Selenium and antidetect apps.
Knowledge base
Fixing a GoLogin Proxy Error, Step by Step
GoLogin proxy error or failed check? Read the full message, test the line outside GoLogin, compare desktop and web, then fix the type, login, DNS or Orbita.
Knowledge base
Dolphin Anty Proxy Not Working: Finding What Broke
Dolphin Anty proxy not working? Tell format errors from failed checks and timeouts, test the line outside the app, and fix protocol, login and network causes.
Knowledge base
Multilogin Proxy Connection Failed: Where to Look First
Multilogin proxy connection failed? Run the proxy check, test the line in a regular browser, then fix the protocol, login, agent, clock or local software.
Products
Dedicated datacenter proxies: one private IPv4 per customer
Private IPv4 proxies in the US, Vietnam, Japan, South Korea, Singapore, the UK and Hong Kong. One tenant per IP, HTTP(S) and SOCKS5, no traffic metering.
Products
Static ISP proxies: residential IPs on consumer networks
Static ISP proxies in the United States and Vietnam: fixed IPs registered to consumer internet providers, rented to one customer, with unmetered traffic.
Pricing
Proxy prices per IP, by location and volume
Current per-IP rates for private IPv4 and static ISP proxies in the US, Vietnam, Japan, South Korea, Singapore, the UK and Hong Kong, with volume discounts.