How to Choose a Proxy for GoLogin, AdsPower and Other Multi-Account Browsers

· Updated:

For GoLogin, AdsPower and similar antidetect browsers, the right proxy is a static IP that only you use, assigned to one profile and kept there. Pick a static ISP IP when the profile runs ad accounts, seller centers or social profiles on a strict platform, and private datacenter IPv4 for dashboards, client portals and lower cost. Choose the country where the account is normally used, and connect over HTTP with a username and password, which every one of these tools accepts.

One static IP for each profile

The short answer: six decisions, in order

A multi-account browser keeps each profile's cookies, storage and browser settings apart, but it sends every profile through whatever network path you give it. The proxy is that path. Choosing one comes down to six decisions, and the order matters: the first two rule out most of the options before price even comes up.

DecisionWhat to pick for antidetect profilesWhy
Static or rotatingStatic: one fixed IP per profileA profile that logs in from a new address every session looks like an account that keeps moving, which invites re-verification.
IP typeStatic ISP for strict platforms, private datacenter IPv4 for the restSome platforms treat hosting networks more cautiously than consumer ones; many business tools do not care.
CountryWhere the account is normally usedThe login location should match the client, store or market the account belongs to.
ProtocolHTTP with username and passwordEvery antidetect browser covered in our setup guides takes it; SOCKS5 is an option where offered.
Login methodUsername and password, unless every machine has a fixed public IPIP whitelist login only works from the addresses you list.
How many IPsOne per profile that represents a separate client, team or marketSharing one IP across unrelated profiles ties their login histories together.

Static, not rotating, for profiles that log in

Rotating proxies change the exit IP per request or on a timer. That suits bulk requests to public pages, where no single address should carry all the traffic. It works against an antidetect profile, whose whole purpose is to look like the same user on the same device every day. Account security systems watch for sudden changes in login location, so a profile that arrives from a new IP each time is more likely to be challenged than one that always comes from the same place.

So the default for GoLogin, AdsPower, Dolphin{anty}, Multilogin and the rest is a static proxy: the IP stays the same for as long as the proxy is active, and renewing before expiry keeps that same address. ProxyV4 sells only static IPs; its rotating product is a Vietnam waitlist, not something you can order. If a job really needs many exits, such as collecting public data, see when rotating fits and when a static IP is better.

Static ISP or private datacenter IPv4?

Both are static and both have one tenant for the whole term. The difference is the network the address belongs to. A private datacenter IPv4 address is registered to a hosting network. A static ISP address is registered to a consumer internet provider, which is the kind of network most people browse from at home. Some platforms, often ad networks and large marketplaces, treat hosting ranges more cautiously than consumer ones.

Use the job, not the browser, to decide. The table matches common antidetect workloads to a type and a guide; the platform guides also list the locations that fit each platform.

What the profile runsType to start withGuide
Facebook or Google ad accountsStatic ISP (US or Vietnam)Facebook Ads proxies, Google Ads proxies
Marketplace seller accounts: Amazon, eBay, Etsy, Shopee, TikTok ShopStatic ISP where offered, else private IPv4 in the store's countryAmazon, Shopee, TikTok Shop
Social profiles managed for clientsStatic ISP or private IPv4, one per clientSocial media management
Client portals, dashboards, QA and region checksPrivate datacenter IPv4Private IPv4 proxies
Accounts used in Japan, South Korea, Singapore, the UK or Hong KongPrivate datacenter IPv4 in that countryProxy locations

Where each type is available

  • Private datacenter IPv4: United States, Vietnam, Japan, South Korea, Singapore, United Kingdom and Hong Kong.
  • Static ISP: United States and Vietnam only. For an account based in another country, private IPv4 in that country keeps the location right.
  • IPv6: sold in all seven countries, but it only works on sites and apps that accept IPv6 connections. Not every platform accepts IPv6, so test the target before you give a profile an IPv6 address.

Country: match the account, not your office

Pick the country where the account is normally used, which is usually where the client, store or audience is. A store run for a Japanese business belongs on a Japanese IP; a US ad account belongs on a US IP. Then make the profile agree with it: set the timezone, language and geolocation in the profile to the proxy's country, and check WebRTC, because a profile that shows a US IP but a different country through WebRTC tells two stories. Many antidetect browsers offer an option to set them from the proxy's IP. Match the fingerprint to the proxy location covers the fields, and which proxy location to choose covers the country decision in more depth.

Protocol and login: what antidetect browsers accept

Every antidetect browser in our setup guides accepts an HTTP proxy with a username and password, and most will split a pasted ip:port:user:pass line into host, port, username and password for you. That is the format ProxyV4 delivers, so HTTP is the simplest choice and the one the guides use. SOCKS5 is offered on private IPv4 outside Vietnam and on US static ISP; Vietnam IPs are HTTP(S) only. Each order can be set to HTTP, SOCKS5 or both on one port, and switching can move the proxy to a new port, so copy the line again after a change.

Username and password is the safer login for antidetect work. Cloud-synced profiles, as in GoLogin, are often opened from several computers, and the credentials travel with the profile. IP whitelist login, set on the order page for up to three public IPv4 addresses, removes the password but only works when every computer that opens the profile connects from one of those addresses. IP whitelist vs username and password explains the trade-off.

Where the proxy goes in each tool

The fields differ by tool and version, but the choice of proxy does not. This table points to the panel each of our guides uses and the guide itself.

ToolWhere to add the proxySetup guide
GoLoginProfile > Proxy tab > Your Proxy, type HTTP ProxyGoLogin setup
AdsPowerProfile editor > Proxy > Custom, type HTTPAdsPower setup
Dolphin{anty}New profile > New proxy, type HTTPDolphin{anty} setup
MultiloginProxy settings > Custom, protocol HTTPMultilogin setup
MoreLoginAdvanced Create > Proxy Info > Custom, type HTTPMoreLogin setup
Octo BrowserConnection tab, Proxy cell or Proxies page, type HTTPOcto Browser setup
IncognitonProxy tab > Connection type HTTP proxyIncogniton setup
KameleoConnection tab, type HTTP, Authentication onKameleo setup
GenLoginProxy selector > HTTP ProxyGenLogin setup
HidemyaccNew Profile > Proxy > Your Proxy, HTTP ProxyHidemyacc setup

How many proxies for how many profiles

Count the units that genuinely operate separately: clients, business units, teams or markets. Each of those gets its own static IP, and profiles that belong to the same unit can share it. A single high-value account, or one used from a different country, gets its own. No platform publishes a safe number of accounts per IP, so treat any fixed ratio you read as a guess; how many accounts per proxy walks through the reasoning.

Two habits keep this clean. Decide a profile's IP when you create it, because adding or changing it weeks later looks like the account moved. And never move an IP from one client's profile to another's midway, since that joins the two histories you were keeping apart.

Test one IP before you buy for every profile

  • Buy a single IP in the type and country you picked. A one-IP order is allowed.
  • Paste the line into the proxy checker to confirm it answers and shows the expected country.
  • Add it to one profile and press the tool's own check button, then open the WebRTC leak test inside that profile.
  • Run the real workflow for a while. If it holds, scale with quantity tiers on the pricing page; if a proxy fails for a technical reason, the refund policy credits your balance.
  • Renew before expiry to keep the same addresses on every profile.

What a proxy will not do

A proxy changes the network path of a profile, not the rules of the platform it logs in to. Most platforms limit how many accounts one person or business may hold, and many offer agencies an official route such as business managers or partner accounts. Use separate profiles and IPs to keep legitimately separate clients and teams apart, and follow each platform's terms on multiple accounts.

Frequently asked questions

What is the best proxy type for GoLogin or AdsPower?

A static proxy that only you use, one per profile. Choose static ISP for ad accounts, seller centers and social profiles on strict platforms, and private datacenter IPv4 for dashboards, client portals and work where cost per IP matters more.

Can I use rotating proxies in an antidetect browser?

You can, but it works against the profile. An account that logs in from a new IP every session looks like it keeps moving. Keep rotation for bulk requests to public pages and use a static IP for profiles that log in.

Should I choose HTTP or SOCKS5 for antidetect profiles?

HTTP with a username and password works in every antidetect browser our guides cover and is the simplest choice. SOCKS5 is available on private IPv4 outside Vietnam and on US static ISP if your workflow needs it.

Do IPv6 proxies work in GoLogin or AdsPower?

The browsers can use them, but the sites must accept IPv6. Not every platform accepts IPv6, so test the target first; private IPv4 works on every IPv4 and dual-stack site.

Can several profiles share one proxy?

Profiles that belong to the same client or business can share one IP. Profiles for unrelated clients should each have their own, so their login histories stay apart.

One static IP for each profile

Static ISP in the US and Vietnam, private IPv4 in seven countries, one tenant per IP and the same address on renewal. Start with one IP and test it in your browser.

Compare locations

Related articles

Proxy setup
GoLogin proxy settings for profiles opened on more than one machine
Add your own HTTP proxy to GoLogin under Proxy -> Your Proxy, sync timezone and WebRTC in Orbita, import a list, and diagnose failed checks by symptom.
Proxy setup
Adding a private IPv4 proxy to AdsPower, one profile or fifty
Add an AdsPower proxy to SunBrowser or FlowerBrowser profiles: Custom HTTP fields, bulk import via the Proxies page, error fixes and a final exit-IP check.
Use cases
How to run dozens of accounts without them collapsing into one
Proxies for managing many accounts: why each account needs a private, fixed IP, how to size and label the pool, and the habits that quietly link accounts.
Knowledge base
Do You Need a Proxy With an Antidetect Browser? Fingerprint vs IP
Do you need a proxy with an antidetect browser? What profiles separate, what only an IP changes, when one static IP per profile helps and when to skip it.
Products
Static ISP proxies: residential IPs on consumer networks
Static ISP proxies in the United States and Vietnam: fixed IPs registered to consumer internet providers, rented to one customer, with unmetered traffic.
Proxy setup
Set up your proxy, tool by tool
Proxy setup instructions you can follow with the dashboard open: antidetect browsers, operating systems, browser extensions and scraping libraries, all with authenticated HTTP(S) or SOCKS5.
Knowledge base
How to Match Browser Settings to Your Proxy Location
Match browser fingerprint to proxy location the honest way: align timezone, language and location settings with the IP country for client accounts and QA.
Knowledge base
How to Bulk Import Proxies Into Antidetect Browser Profiles
Bulk import proxies into an antidetect browser: the ip:port:user:pass format, cleaning a list, assigning one proxy per profile, and fixing failed imports.
Knowledge base
How to Disable WebRTC Leaks in Chrome and Firefox
Stop WebRTC leaks in Chrome and Firefox: set media.peerconnection.enabled, the WebRTC IP handling policy, then confirm your proxy IP with a leak test.
Free tools
Check proxies in bulk: status, exit IP and latency
Free online proxy checker: paste up to 100 ip:port:user:pass lines and see which proxies work, their exit IP and latency, plus what each failure result means.